|
| |
EPDM Type EE1 3000
Series
Click
Here for Tech Data Sheet
Click Here for Tech Data Sheet Page 2
Interior
Partition Closure |
 |
 | A = Thickness distance
from end of partition wall to interior glass or mullion wall (greater than joint opening
by 15 - 25%).
|
| B = Width: is distance
from one side to the other.
|
| C = Length, from top
to bottom.
|
|
| Features & Specifications Available in Black or Gray, provides sound deading, material is UV
resistant
Complies with ASTM 1056-73 suffix letters BCF2MP, ASTM Designation RE 41
|
|
Everlastic® EPDM Sponge
3000 Series
| Description
An expanded, closed-cell, Ethylene Propylene Diene
sponge rubber. Non-absorbent, compressible, resilient that provides good thermal and
moisture insulation. Everlastic® EPDM sponge is generally resistant to acids,
alkali, oxidation and ozone. Everlastic® EPDM sponge is not recommended
in applications that require oil resistance.
|
| Uses
 | Closures to close off the gap at the top of
non-rated walls
|
| Closures strips of plugs with profiles that close
off fluted decks
|
| Partition Gaskets where partitions abut other
partitions or exterior windows and walls
|
| Expansion joint filler in masonry and concrete
|
| Other applications that require a soft economical
gasket resistant to weather, ozone and or heat
|
|
| Available Sizes
| Available in sheets, strips or cut parts.
|
| Self stick pressure sensitive adhesive (PSA) on
one or two sides.
|
| Full buns 2" x 48" x 80".
|
| Custom cut to thickness, width and length.
|
| Larger dimensions factory spliced or bonded as
needed
|
|
| Typical Physical Properties
| Property |
Test Method |
Typical Values |
| Polymer Base |
n/a |
EPDM |
| Color |
n/a |
Black or Gray |
| Density-lbs. per Cubic Foot |
ASTM D 1056-91 |
4 +/- 1 |
| Compression/Deflection @ 25% Defl. |
ASTM D 1056-91 |
2 to 5 psi |
| Elongation (Die A) |
ASTM D 412-92 |
200% |
| Ultimate Tensile Strength (Die A) |
ASTM D 412-92 |
40 psi |
| Water Absorption- Maximum increase in weight |
ASTM D 1056-91 |
5% max. |
| Service Temperature Low
High Continuous
High Intermittent |
ASTM D 746-79
|
-70°F
220°F
250°F |
| K Factor - BTU/hr. (sf) °F inch |
n/a |
0.30 |
|
|
