wilpro5.gif (2378 bytes)wilprowebhdBGif.GIF (133986 bytes)worldwide8.GIF (127671 bytes)

Back Home Next

Product Index
Concrete
Masonry
Thermal & Water Protection
Custom Designs
Sealants
Download
Search

 

Thermal and Water Protection Products

bullet

2nd Seal

Everlastic® 2nd Seal Williams Everlastic 2nd Seal is placed prior to the primary seal assuring a watertight seal should the primary seal fail.  The 2nd seal can be used in vertical or horizontal applications or as a primary seal when appearance is not an issue.

 

bullet

Wide Joint Seal

Everlastic® Wide Joint Seal is a pre-factory cured strip of silicone sealant adhered to rectangular polyurethane backer. The polyurethane backer is wider than the joint opening and the silicone is of a lesser width than the joint opening. The backer is compressed and placed into the joint, thus holding the cured silicone in a vertical position and leaving a recess on either side of the cured silicone and parallel substrate. A wet silicone sealant is caulked and tooled into the recess bridging the cured silicone and the interface of the parallel substrate.

 

bullet

Closures

Closed Cell EPDM Synthetic Rubber Closures.  Available in 1" thick (& 1-1/2" thick) horizontal gray, black & redwood colors.

 

bulletNew3d3.gif (15239 bytes)    Everlastic Fire Classified Closures 1715

Fire Classified Closure manufactured of Compressible Open Cell Sponge.  Used for Partition closure or plug for Metal Decking.

bullet

3000 Series, Closed Cell EPDM

Everlastic® EPDM Sponge 3000 Series is expanded, closed-cell, Ethylene Propylene Diene sponge rubber.  Non-absorbent, compressible, resilient, and provides good thermal and moisture insulation.   Everlastic® EPDM Sponge is generally resistant to acids, alkali, oxidation and ozone.  Everlastic® EPDM Sponge is not recommended in applications that require oil resistance.

 

bullet

Roof Expansion Joints using NN - 1

Everlastic® NN-1 is a soft, expanded, closed cell, sponge rubber.  Blend of Neoprene, EPDM and SBR.

 

bullet

Everlastic Cavity Wall Baffle using EVA-200G

Everlastic® EVA 200G is a cross-linked, closed cell, ethylene/vinyl/acetate foam.

 

bullet

EVA-400G

Everlastic® EVA 400G is a cross-linked, closed cell, ethylene/vinyl/acetate foam.

 

bullet

Dust Shield

Dust Shield - Ceiling Tile is a medium density polyether foam, firm ILD range, designed to meet a broad range of furniture, automotive seating and dust shield for ceiling tile applications.

 

bullet

Flex Step

All Weather Stair Covering designed to prevent ice build up, channel water from underfoot and reduce noise on stairwells.

 

bullet

Flex Pad

Fatigue Reducing Floor Mat designed to reduce leg and foot fatigue in production environments

 

wilpro5.gif (2378 bytes)  

To the best of our knowledge this published information is accurate, however, to determine suitability of material/product for a specific application is the user's responsibility.  Williams Products, Inc. shall not be liable for any loss or damage resulting from inappropriate usage.

 
Everlastic® is a registered trademark of Williams Products. All other products mentioned are registered trademarks or trademarks of their respective companies.
Contact Williams Products: Phone: 800-521-9594 or 248-643-6400 or Email: Wilpro@williamsproducts.net
Questions or problems regarding this web site should be directed to;   rwhit1@whitlockimaging.com     
Copyright © 2002 Williams Products/WI. All rights reserved.