Bear-Pad 200                                  Cross Laminated with oriented fibers

Fab-Pad 300                                    Laminated, rubber and ductile fabric

1200 Series                                     Commercial Grade Dense Neoprene

AASHTO Grade Neoprene            Conforms to AASHTO requirements, 2500 PSI tensile strength

Compounds                                     Neoprene, Styrene-Butadiene-Rubber(SBR)

Sizes(widths)                                   6", 9" & 12"

Profiles                                             Dumbbell(DB) and Centerbulb(CB)

Click Here for Waterstop Technical Data

Extruded and molded closed cell neoprene sponge.  Use as hot or cold applied sealant backup; to fill vertical and horizontal joints.  Resistant to heat, ultraviolet and many chemicals.

Hi Tensile Neoprene Williams Compound # 1025

Also available in other rubber compounds to meet custom specifications

Econ-O-Foam                                 CCPE

EJ-2000                                           XL Polyolifin

1040 to 1080 Series                      Closed Cell Neoprene

1300 Series                                     Concrete Gray Sponge Rubber

1400 Series                                     Open Cell Neoprene (Vibration Isolation)

Column Boxboard                         Coated Corrugated

Econ-O-Foam                                  CCPE

EJ-2000                                            XL Polyolifin

Everlastic Cavity Wall Baffle using EVA 200

Compartmentalization of the cavity wall system will equalize the negative pressure within the wall cavity to the exterior positive pressure more quickly and efficiently when using PVC brick vents, cell vents or open head joints.

Slot Seal Standard, Wide Flange, Block Seal

Weathertite R, Everlasticā M-CJ

Econ-O-Foam for Bond Break in core

Fill gap at top of wall

Air Seal Gasket

Close off gap between wall and deck (flat or fluted)

Fire Rated

MWM-40

MF-40

Neoprene Membrane

Self-stick, CC Neoprene

Thermal and moisture break behind anchors

Neo Seal IV

M-CJ

Econ-O-Foam

Williams #37 A Contact Adhesive

Williams #37 C - Low VOC

Williams-Goodco PVC Brick Vents

    Williams-Goodco CMU Vents All New CMU Weep System

The Williams-Goodco CMU vent is an injection molded vent made from flexible polyvinyl chloride in an offset "T" shape. When inserted in vertical mortar joints between two bricks the slotted leg of the vent allows air to pass in and out allows water to weep out and prevents water from penetrating in.