|
| |
ECON-O-FOAM
Click
Here for Tech Data Sheet
 | DESCRIPTION
PREFORMED JOINT FILLER CLOSED CELL EXPANDED POLYETHYLENE 1390 SERIES |
|
For Column Isolation |
| PROPERTIES AND CHARACTERISTICS
 | 1. Compressive Strengths: Econ-O-Foam is
available in a variety of compressive strengths, and can support a wide range of loads. |
| 2. Weights: Econ-O-Foam is available in
densities ranging from 1.5 to 1.7 pounds per cubic foot. |
| 3. Chemical Resistance: Econ-O-Foam offers
excellent stability when exposed to most acids, hydrocarbons, chlorinated solvents,
petroleum products, paints, varnishes, thinners and alcohols. |
| 4. Temperature Range: Econ-O-Foam polyethylene
foam has been used successfully in temperatures ranging from -40°F to 160°F, without
significant effect on many of its properties. |
| 5. Water Absorption: Econ-O-Foam polyethylene is
virtually impermeable. The amount of water Econ-O-Foam absorbs in negligible even when
used in flotation applications. Econ-O-Foam also offers high resistance to transmission of
water vapors, with ratings of less than 0.1 per inch. It contains no water soluble
constituents. |
| 6. Availability: Econ-O-Foam is available in sheet
and roll stock, cut in strips, pads and trimmed or mill run sheets. |
| 7. Thickness: 1/8", 1/4", 3/8",
1/2" roll or sheet stock. 5/8" and above, sheet stock only, 24" x
108". |
|
|
