wilpro5.gif (2378 bytes)wilprowebhdBGif.GIF (133986 bytes)worldwide8.GIF (127671 bytes)

Home Up Next

Product Index
Concrete
Masonry
Thermal & Water Protection
Custom Designs
Sealants
Download
Search

 

The Problem:

An accumulation of ice or ponding of water on a staircase or noisy stairwells in residential or commercial areas

The Solution:

An "All Weather" covering made of natural rubber designed to break ice build up on stairways with each step, channel water from under foot, improving safety and reducing the use of products or equipment that may cause damage to the stair material.  Current solutions are not the answer.  Shovels and chisels/scrapers damage the steps.  Salt is ineffective at -15°F and carpets of jute or synthetic turf absorb water and freeze, creating hazardous conditions.

Advantages

bullet

Flexible in cold weather

bullet

Placing foot’s weight on step causes cover to sink breaking ice

bullet

No effort needed to break ice

bullet

Channels water from under foot

bullet

Reduces noise on staircases of all types

bullet

Does not absorb water

bullet

Easy to maintain, cleans with a broom

bullet

No need for harsh abrasives or chemicals

bullet

Permanent installation

bullet

Resistant to ice melting products (salt, potassium or calcium chloride)

bullet

Less accumulation of ice

Easy to Install

bulletCenter Flex-Step on each step.
bulletInstall the front screws in the pre-drilled holes first starting at the center and going outward.
bulletPush the Flex-Step toward the back and install rear screws in the pre-drilled holes flush to the tread without pressure.

*Flex-Step must be properly anchored to stair tread for proper operation and safety. (Anchors not included)

**Flex-Step is available in 26” lengths or may be joined together for custom lengths or factory cut to specified lengths

 

wilpro5.gif (2378 bytes)  

To the best of our knowledge this published information is accurate, however, to determine suitability of material/product for a specific application is the user's responsibility.  Williams Products, Inc. shall not be liable for any loss or damage resulting from inappropriate usage.

 
Everlastic® is a registered trademark of Williams Products. All other products mentioned are registered trademarks or trademarks of their respective companies.
Contact Williams Products: Phone: 800-521-9594 or 248-643-6400 or Email: Wilpro@williamsproducts.net
Questions or problems regarding this web site should be directed to;   rwhit1@whitlockimaging.com     
Copyright © 2002 Williams Products/WI. All rights reserved.