Open Cell Sponge Neoprene 1400 Series

Description

Black Neoprene Sponge Rubber with an interlinking cell structure for increased compressibility and outstanding resiliency.

1400series.GIF (2325 bytes)

Uses

Structural Isolation; Vibration Dampening; Press Pit Lining; Sealant back up; etc.

Available Roll Sizes

	1/4" x 36" x 60 LF
	3/8" x 36" x 45 LF
	1/2" x 36" x 36 LF
	1" x 36" x 24 LF
	Other Thicknesses available upon request
	Thicknesses greater than 1" must be laminated
	Material may be slit, die cut or saw to any size needed

For Press Pit Applications

The 1400 Series is very soft and will Absorb the lateral movement.

Presspit.GIF (2913 bytes)

The 1200 Series is very hard and will Isolate and disperse the vibration from the sub base.

Typical Physical Properties

Property	Typical Values
Density	25 to 40 p.c.f.
Compression Deflection 25%	2 to 5 psi.
Compression Set 50% (50% Deflection 22 hrs @ 158°F)	50% Max
Tensile	60 psi. min. (.125" thick specimen)
Elongation	300% min. (.125" thick specimen)
Durometer	2 to 7 Shore "A" hardness
Aged Compression Deflection	+/-20% change from original (7 days @ 158°F)
Resilience Factor (Bayshore Method)	30 to 40 % Rebound (.50" thick at room temperature)


	To the best of our knowledge this published information is accurate, however, to determine suitability of material/product for a specific application is the user's responsibility. Williams Products, Inc. shall not be liable for any loss or damage resulting from inappropriate usage.

Everlastic® is a registered trademark of Williams Products. All other products mentioned are registered trademarks or trademarks of their respective companies.
Contact Williams Products:	Phone: 800-521-9594 or 248-643-6400 or Email: Wilpro@williamsproducts.net
Questions or problems regarding this web site should be directed to; rwhit1@whitlockimaging.com Copyright © 2002 Williams Products/WI. All rights reserved.