|
| |
Rubber "J"
Gate Seal
Click Here for Tech Data Sheet
 | Description
 | Hi Tensile Neoprene Williams Compound # 1025
|
| Also
available in other rubber compounds
|
|
| Dimensions
| Width +/- 3/16"
|
| Diameter of Bulb +/- 1/16"
|
| Length 50' +/- 2' 0"
|
| Custom
configurations available at your request
|
|
|
 |
| Available Sizes
| 1 3/4" DIA Solid Bulb or Hollow Bulb 4"
Wide
|
| Also
available in custom configurations to meet your specifications
|
|
| Typical Physical Properties
Property |
Typical Values |
| Tensile Strength |
2500 min. PSI |
| Ultimate Elongation |
400 % min. |
| Shore "A" Durometer |
60 \ 70 |
| Specific Gravity |
1.4 |
| Compression Set |
30 % max. |
| Tensile Strength after Oxygen Bomb Aging |
80 % min. |
| Ozone Resistance |
Good |
|
All "J" Seals, set forth in these
specifications and/or shown on the drawings, shall be of an extruded NEOPRENE Rubber, with
a SOLID or HOLLOW bulb, and 4" wide, as manufactured by Williams Products, Inc.
If corner sections are required they should be factory molded from the same compound and
vulcanized to the extrusions to form the complete fabricated seals.
|
